Pines Delivers New Bender for Spanish Air Force
Pines has delivered a new Pines #2 NC bender to the Spanish Air Force. With the capability to make multiple bend parts up to 3-inch in diameter this m...
.jpg?width=800&height=450&name=Metric-Bender%20(1).jpg "Metric Bender")
.jpg?width=600&height=338&name=Metric-Bender%20(1).jpg)
e42
Specifically designed for the European market, the e42 is arranged for clockwise/counterclockwise bending rotation with 150mm maximum radius. Thanks to it, the most complex bends become reality with great accuracy.
Technical Data
Capacities
- Round tubing, mild steel Y.P. to 275 MPa – 38x3.0mm
- Round tubing, non-ferrous Y.P. to 175 MPa – 42x3.0mm
- Round tubing, stainless steel Y.P. to 420 MPa – 35x2.0mm
- Square tubing, mild steel – 25x3.0mm
Specifications
- Maximum radius – 150mm
- Minimum radius to diameter ratio – 1D
- Programmable motion – 10-Axis
- Maximum bend angle – 190º
- Bend arm repeatability – +/- 0.05º
- Carriage repeatability – +/- 0,1mm
- Bend arm forward speed – 25 RPM
- Bend arm reverse speed – 25 RPM
- Standard tube length over mandrel – 4m
- B-Axis travel: 360º – speed: 100 RPM
- Y-Axis travel: 2400mm - speed: 45000 RPM
- Dimensions – ~ 5600mm L x 1350mm W x 1650mm H
- Working height ~ 1300mm
- Voltage – 400 3 phase 50 Hz. 50 amp circuit required (230/3/50 @ 100 amps also available)
- Weight – Approximately 2600kg
2-year warranty
