Pines Delivers New Bender for Spanish Air Force
Pines has delivered a new Pines #2 NC bender to the Spanish Air Force. With the capability to make multiple bend parts up to 3-inch in diameter this m...
e40
The e40 is arranged for counterclockwise rotation with 6" maximum radius. It comes complete with a push carriage for positioning of tubes between bends, head shift for multi-stack tooling and multi-radius bend configurations, electric mandrel extractor, electric PDA, heavy-duty mandrel lubricator, quick change tooling, and programmable clamp and pressure die holders.
Max tube size: 1-1/2" x .109" steel tubing
Technical Data
Capacities
- Round tubing, mild steel Y.P. to 40,000 psi – 1.5 x .109”
- Round tubing, non-ferrous Y.P. to 25,000 psi – 1.625” x .135”
- Round tubing, stainless steel Y.P. to 60,000 psi – 1.375 x .065”
- Steel pipe, schedule 80 – 1
- Square tubing, mild steel – 1.125 x .120”
- Maximum radius – 6”
- Minimum radius to diameter ratio – 1D
- Programmable motion – 10-Axis
- Maximum bend angle – 190º
- Bend arm repeatability – +/- 0.05º
- Carriage repeatability – +/- .005”
- Bend arm forward speed – 25 RPM
- Bend arm reverse speed – 25 RPM
- Standard tube length over mandrel – 13’
- B-Axis travel: 360º – speed: 60 RPM
- Y-Axis travel: ’ 8- speed: 2000 IPM
- Dimensions – ~ 18’ L x 4’ W x 5.5’ H
- Working height ~ 48.5”
- Voltage – 480 3 phase 60 Hz. 50 amp circuit required (220/3/60 @ 100 amps also available)
- Weight – Approximately 6,000 lbs.
- 2-year warranty
e75
The e75 is arranged for counterclockwise rotation with a 10" maximum radius. The machine comes complete with a push carriage for positioning of tubes between bends, head shift for multi-stack tooling and multi-radius bend configurations, electric mandrel extractor, electric PDA, heavy-duty mandrel lubricator, quick-change tooling, and programmable clamp and pressure die holders.
Max tube size: 3" x .109" steel tubing
Technical Data
Capacities
- Round tubing, mild steel Y.P. to 40,000 psi – 3 x .109”
- Round tubing, non-ferrous Y.P. to 25,000 psi – 3 x .135”
- Round tubing, stainless steel Y.P. to 60,000 psi – 3 x .065”
- Steel pipe, schedule 80 – 2
- Square tubing, mild steel – 3 x .120”
Specifications
- Maximum radius – 10”
- Minimum radius to diameter ratio – 1D
- Programmable motion – 10-Axis
- Maximum bend angle – 190º
- Bend arm repeatability – +/- 0.05º
- Carriage repeatability – +/- .005”
- Bend arm forward speed – 25 RPM
- Bend arm reverse speed – 25 RPM
- Standard tube length over mandrel – 13’
- B-Axis travel: 360º – speed: 60 RPM
- Y-Axis travel: ’ 8- speed: 2000 IPM
- Dimensions – ~ 18’ L x 4’ W x 5.5’ H
- Working height ~ 48.5”
- Voltage – 480 3 phase 60 Hz. 50 amp circuit required (220/3/60 @ 100 amps also available)
- Weight – Approximately 6,000 lbs.
- 2 year warranty – Defects in material and workmanship