Pines Delivers New Bender for Spanish Air Force
Pines has delivered a new Pines #2 NC bender to the Spanish Air Force. With the capability to make multiple bend parts up to 3-inch in diameter this m...
Model 1
Pines Model 1 Extrusion Bending Machine with a two axis PLC control customized to bend aluminum extrusions and profile shapes. Standard machine is arranged for Counterclockwise Rotation with 8-inch maximum radius capability. The machine comes complete with carriage for positioning the extrusion, clamp and pressure die holders, automatic slide lubricator, all necessary hydraulics, valves, piping, and cylinders. Complete bender operations are self-contained in the machine base and include water-cooled heat exchanger for the hydraulic oil.
Technical Data
Capacities
- Profile shapes that fit within the 3.5” vertical tooling envelope
- Aluminum Profile shapes with a maximum section modulus of .200
- Steel Profile shapes with a maximum section modulus of .157
- Maximum standard radius – 8”
- Minimum radius to diameter ratio – 1
- Maximum bend angle – 190º
- Bend arm repeatability – +/- .1º
- Carriage repeatability – +/- .01
- Y-axis travel: 17’ – Speed: 1200 IMP
- Bend arm speed – Forward – 15.5 RPM / Reverse 28.6 RPM / Average 22 RPM (180°)
- Tool mounting – Standard Model 1 CCW
- Motor horsepower – 7.5HP
- Working height ~ 34”
- Approximate weight – 2,750 lbs.
- Oil reservoir – Completely sealed reservoir with 44-gallon capacity
Model 2
Pines Model 2 Extrusion Bending Machine with a two axis PLC control customized to bend aluminum extrusions and profile shapes. Standard machine is arranged for Counterclockwise Rotation with 8-inch maximum radius capability. The machine comes complete with carriage for positioning extrusions, clamp and pressure die holders, automatic slide lubricator, all necessary hydraulics, valves, piping, and cylinders. Complete bender operations are self-contained in the machine base and include water-cooled heat exchanger for the hydraulic oil.
Technical Data
Capacities
- Profile shapes that fit within the 4.0” vertical tooling envelope
- Aluminum Profile shapes with a maximum section modulus of .950
- Steel Profile shapes with a maximum section modulus of .716
- Maximum standard radius – 8”
- Minimum radius to diameter ratio – 1
- Maximum bend angle – 190º
- Bend arm repeatability – +/- .1º
- Carriage repeatability – +/- .01
- Y-Axis Travel: 18’ – Speed: 1200 IMP
- Bend arm speed –Average 9.7 RPM (180°)
- Tool Mounting – Standard Model 2 CCW
- Motor horsepower – 15 HP
- Working height ~ 38”
- Approximate weight – 4,600 lbs.
- Oil reservoir – Completely sealed reservoir with 55-gallon capacity