Pines Delivers New Bender for Spanish Air Force
Pines has delivered a new Pines #2 NC bender to the Spanish Air Force. With the capability to make multiple bend parts up to 3-inch in diameter this m...
Model 1
Pines Model 1 is a rotary hydraulic bending machine with counterclockwise Rotation. The machine comes complete with clamp and pressure die holders, automatic slide lubricator, all necessary hydraulics, valves, piping, and cylinders. Complete bender operations are self-contained in the machine base.
Max pipe size: 1" IPS Sch 80
Max tube size: 1 1/2" OD x .109" Wall
Technical Data
Capacities
- Round tubing, mild steel Y.P. to 40,000 psi – 1 1/2” x .109”
- Round Tubing, non-ferrous Y.P. to 25,000 psi – 1 1/2” x .187”
- Round tubing, Stainless steel Y.P. to 60,000 psi – 1 3/8” x .065
- Steel pipe, schedule 80 – 1
- Square tubing, mild steel – 1 1/8“x .120
- Maximum standard radius – 8”
- Minimum radius to diameter ratio – 1
- Maximum bend angle – 190º
- Bend arm repeatability – +/- .1º
- Maximum standard tube length over mandrel – 119”
- Bend arm speed – Forward – 15.5 RPM / Reverse 28.6 RPM / Average 22 RPM (180°)
- Motor horsepower – 7.5HP
- Approximate weight – 2,750 lbs.
Model 2
Pines Model 2 is a 3-axis DAB bending machine with manual carriage, rotary hydraulic bending machine with counterclockwise rotation, electrical solenoid actuated hydraulic circuit controlled from a convenient multiple push button operating station, and cushioned hydraulic cylinders, which add to machine life by eliminating shock.
Max pipe size: 2" IPS Sch 80
Max Tube size: 3.0" OD x .109 Wall
Technical Data
Capacities
- Round tubing, mild steel Y.P. to 40,000 psi – 3” x .109
- Round Tubing, non-ferrous Y.P. to 25,000 psi – 3” x .187
- Round tubing, Stainless steel Y.P. to 60,000 psi – 3” x .065
- Steel pipe, 2 IPS schedule 80
- Square tubing, mild steel – 2” x .125
- Maximum standard radius – 12”
- Minimum radius to diameter ratio – 1
- Maximum bend angle – 190º
- Bend arm repeatability – +/- .1º
- Maximum standard tube length over mandrel – 89”
- Bend arm speed – 6 RPM avg. (180°)
- Motor horsepower – 15HP
- Approximate weight – 4,600 lbs.
Model 4
Pines Model 4 has the capacity for 6” x .165” steel tubing or 4” schedule 80 pipe. The machine is arranged for counterclockwise rotation with 24-inch maximum centerline radius as standard. It comes complete with electrical solenoid actuated hydraulic circuit controlled from a convenient operating station, and cushioned hydraulic cylinders, which add to machine life by eliminating shock.
Max pipe size: 4" IPS Sch 80
Max tube size: 6" OD x .165" Wall
Technical Data
Capacities
- Round tubing, mild steel Y.P. to 40,000 psi – 6” x .165
- Round Tubing, non-ferrous Y.P. to 25,000 psi – 6” x .250
- Round tubing, Stainless steel Y.P. to 60,000 psi – 6” x .095
- Steel pipe, schedule 80 – 4” NPS
- Square tubing, mild steel – 4” x .235
- Maximum standard radius – 24”
- Minimum radius to diameter ratio – 1
- Maximum bend angle – 190º
- Bend arm repeatability – +/- .1º
- Maximum standard tube length over mandrel – 162”
- Bend arm speed – 3.5 RPM avg. (180°)
- Motor horsepower – 20HP
- Approximate weight – 12,600 lbs.
Model 6
Pines Model 6, Series 116, is a rotary hydraulic bending machine with clockwise rotation, electrical solenoid actuated hydraulic circuit controlled from a convenient, moveable, touchscreen operating station, and cushioned hydraulic cylinders, which add to machine life by eliminating shock.
Max pipe size: 6" IPS Sch 80
Max Tube Size: 8.0" OD x .250" Wall
Technical Data
Capacities
- Round tubing, mild steel Y.P. to 40,000 psi – 8” OD x .250 Wall
- Round Tubing, non-ferrous Y.P. to 25,000 psi – 8” OD x .375 Wall
- Round tubing, Stainless steel Y.P. to 60,000 psi – 8” OD x .172 Wall
- Steel pipe, schedule 80 – 6” NPS (6.625OD x .432wall)
- Square tubing, mild steel – 6” Square x .250 Wall
- Maximum standard radius – 38 ½”
- Minimum radius to diameter ratio – 1
- Maximum bend angle – 190º
- Bend arm repeatability – +/- .1º
- Maximum standard tube length over mandrel – 72”
- Bend arm speed – .69 RPM / Average for forward and return – 100 Sec. (180°)
- Motor horsepower – 20HP
- Approximate weight – ~23,000 lbs.
Model 8
Pines Model 8, Series 118, is a rotary hydraulic bending machine with clockwise rotation, electrical solenoid actuated hydraulic circuit controlled from a convenient moveable operating station, and cushioned hydraulic cylinders, which add to machine life by eliminating shock.
Max pipe size: 8" IPS Sch 80
Max tube size: 10.0" OD x .250" Wall
Technical Data
Capacities
- Round tubing, mild steel Y.P. to 40,000 psi – 10” OD x .250 Wall
- Round Tubing, non-ferrous Y.P. to 25,000 psi – 10” OD x .375 Wall
- Round tubing, Stainless steel Y.P. to 60,000 psi – 10” OD x .165 Wall
- Steel pipe, schedule 80 – 8” NPS
- Square tubing, mild steel – 8” Square x .250 Wall
- Maximum standard radius – 38 ½”
- Minimum radius to diameter ratio – 1
- Maximum bend angle – 190º
- Bend arm repeatability – +/- .1º
- Maximum standard tube length over mandrel – 72”
- Bend arm speed – .45 RPM / Average for forward and return – 1.5 RPM (180°)
- Motor horsepower – 30HP
- Approximate weight – ~35,000 lbs.