440.278.7200Machines
Electric CNC Tube & Pipe Benders
The world of electric benders has a new leader. We combined enhanced controls with easy setup and operation, then applied these features to the Pines bender product line. The results are the new e40 and e75. They represent a ground-up electric bender design that builds on our foundation of rugged and durable dependability, and adds the latest in bending technology. Features include programmable clamp and pressure die pressures, quick change tooling, roll forming capability, carriage push for shorter grip lengths and X and Z axis head shift for multi-stack tooling. And they’re quiet, too. Get ready to step into a new world of bending technology – a new leader is on the board.
E40
Configuration
The Pines e40 machine is built to stock with the following standard equipment:
- Counter clockwise rotation
- 10 Axis programmable motion
- 1xD bend capability
- Roll forming (calendaring) capability on top stack (additional tooling required)
- Carriage push for reduced clamp grip lengths
- Inline programmable pressure die assist (PDA) and programmable assist force
- Quick change tools – Electric servo motor programmable clamping
- Programmable clamp die holder position (or force control)
- Programmable pressure die holder position (or force control)
- Programmable mandrel extractor position and stroke length
- Automatic mandrel lubricator
- Standard wiper die holder
- Laser safety scanner
- Servo controlled swing arm
- CNC touch screen control system
- Dual palm remote operator control
Many options are available to customize the machine. Including but not limited to:
- Overhead tie bar
- Safety mat option
- Base extensions for increased tube over mandrel length
- Clockwise rotation
Features
- Hitch Feed
- PDI zone recapture
- Springback compensation
- Simultaneous motion of Y & B axes
- X and Z axis shifting bend head
- Open or closed collet bending
- Automatic & semi-automatic mode
- Early mandrel extract
- Part program entry from XYZ, or YBC data
- Part program data conversion to or from XYZ or YBC
- Part program data conversion to or from absolute or incremental
- Part program storage on hard disk or USB memory stick
- Part program reversal and mirror image conversions
- Graphic display of the part with ability to rotate in any direction
Capacities
- Round tubing, mild steel Y.P. to 40,000 psi – 1.5 x .109”
- Round tubing, non-ferrous Y.P. to 25,000 psi – 1.625” x .135”
- Round tubing, stainless steel Y.P. to 60,000 psi – 1.375 x .065”
- Steel pipe, schedule 80 – 1
- Square tubing, mild steel – 1.125 x .120”
Specifications
- Maximum radius – 6”
- Minimum radius to diameter ratio – 1D
- Programmable motion – 10-Axis
- Maximum bend angle – 190º
- Bend arm repeatability – +/- 0.05º
- Carriage repeatability – +/- .005”
- Bend arm forward speed – 25 RPM
- Bend arm reverse speed – 25 RPM
- Standard tube length over mandrel – 13’
- B-Axis travel: 360º – speed: 60 RPM
- Y-Axis travel: ’ 8- speed: 2000 IPM
- Dimensions – ~ 18’ L x 4’ W x 5.5’ H
- Working height ~ 48.5”
- Voltage – 480 3 phase 60 Hz. 50 amp circuit required (220/3/60 @ 100 amps also available)
- Weight – Approximately 6,000 lbs.
- 2 year warranty
Safety Features
- Safety plates protecting both bend and return sides of swing arm
- All electrical components in power panel are “finger-safe” and are in accordance with NFPA standards
- Machine is labeled with pinch and hazard points
- Laser safety scanner/safety mat creates “safety exclusion zone” in front of bender
E75
Configuration
The Pines e75 machine is built to stock with the following standard equipment:
- Counter clockwise rotation
- 10 Axis programmable motion
- 1xD bend capability
- Roll forming (calendaring) capability on top stack (additional tooling required)
- Carriage push for reduced clamp grip lengths
- Inline programmable pressure die assist (PDA) and programmable assist force
- Quick change tools – Electric servo motor programmable clamping
- Programmable clamp die holder position (or force control)
- Programmable pressure die holder position (or force control)
- Programmable mandrel extractor position and stroke length
- Automatic mandrel lubricator
- Standard wiper die holder
- Laser safety scanner
- Servo controlled swing arm
- CNC touch screen control system
- Dual palm remote operator control
Many options are available to customize the machine. Including but not limited to:
- Overhead tie bar
- Safety mat option
- Base extensions for increased tube over mandrel length
- Clockwise rotation
Features
- Hitch feed
- PDI zone recapture
- Springback compensation
- Simultaneous motion of Y & B axes
- X and Z axis shifting bend head
- Open or closed collet bending
- Automatic & semi-automatic mode
- Early mandrel extract
- Part program entry from XYZ, or YBC data
- Part program data conversion to or from XYZ or YBC
- Part program data conversion to or from absolute or incremental
- Part program storage on hard disk or USB memory stick
- Part program reversal and mirror image conversions
- Graphic display of the part with ability to rotate in any direction
Capacities
- Round tubing, mild steel Y.P. to 40,000 psi – 3 x .109”
- Round tubing, non-ferrous Y.P. to 25,000 psi – 3 x .135”
- Round tubing, stainless steel Y.P. to 60,000 psi – 3 x .065”
- Steel pipe, schedule 80 – 2
- Square tubing, mild steel – 3 x .120”
Specifications
- Maximum radius – 10”
- Minimum radius to diameter ratio – 1D
- Programmable motion – 10-Axis
- Maximum bend angle – 190º
- Bend arm repeatability – +/- 0.05º
- Carriage repeatability – +/- .005”
- Bend arm forward speed – 25 RPM
- Bend arm reverse speed – 25 RPM
- Standard tube length over mandrel – 13’
- B-Axis travel: 360º – speed: 60 RPM
- Y-Axis travel: ’ 8- speed: 2000 IPM
- Dimensions – ~ 18’ L x 4’ W x 5.5’ H
- Working height ~ 48.5”
- Voltage – 480 3 phase 60 Hz. 50 amp circuit required (220/3/60 @ 100 amps also available)
- Weight – Approximately 6,000 lbs.
- 2 year warranty – Defects in material and workmanship
Safety Features
- Safety plates protecting both bend and return sides of swing arm
- All electrical components in power panel are “finger-safe” and are in accordance with NFPA standards
- Machine is labeled with pinch and hazard points
- Laser safety scanner/safety mat creates “safety exclusion zone” in front of bender